Article number: 13200
Blades from Casström's Swedish Forest Knife are now available separately! These powerful full-tang blades are designed for versatile use in hunting, Bushcraft and general forest use. A knife made with this blade can go through an elk, as well as carve in wood or split wood.
The blade is 10 cm long and made of 3.5 mm thick O2 tool steel. The blades are sharpened with a Scandinavian grind with secondary micro-bevel.
The blade now comes with the logotype lazer etched on the blade.
Holes: 5 mm (x3), 7 mm (x1) Suitable corby rivets: middle 4,6 mm, e.g. 3710, 3720
ABOUT THE STEEL:
O2 HIGH CARBON TOOL STEEL
Böhler Tool Steel K720 is a very tough and strong oil hardened high carbon tool steel. The chemical composition allows it to be hardened to a high degree whilst maintaining ductility and toughness at the same time as it is easy to sharpen and can obtain a razor sharp edge. Whilst easy to sharpen, the low chromium content means it will tarnish if left wet and it must therefore be wiped after use and protected by oil or wax when put away for storage. Steel analysis: C. 0.9%, Si. 0.25%, Mn. 2.0%, Cr. 0.35% V. 0.1% (HRC 58-60)